HDD Low Level Format Tool 4.50 | Portable
Low Level Formatting refers to the true process of disk formatting operation. It builds the physical format by assigning the location where the data is kept on the disk. The HDD Low Level Format Tool is an application that does or at least comes close to doing this particular thing. The real Low Level Format is done in the factory, while tools such as this one only do zero-fills.In fact,
HDD Low Level Format Tool re-initializes the hard drive to its factory configuration by writing a zero byte to its each and every location on the disk. This fully and irreversibly erases all data (if present) from your disk. The main reason to do this is the attempt to revitalize your infected or corrupted hard drive. Low Level Formatting also hides the bad sectors in order to create a clean and error-free surface for your data.
HDD Low Level Format Tool re-initializes the hard drive to its factory configuration by writing a zero byte to its each and every location on the disk. This fully and irreversibly erases all data (if present) from your disk. The main reason to do this is the attempt to revitalize your infected or corrupted hard drive. Low Level Formatting also hides the bad sectors in order to create a clean and error-free surface for your data.
Features
- Supported interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, SAS, USB, FIREWIRE.
- Big drives (LBA-48) are supported.
- Supported Manufacturers: Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital, and almost any other not listed here.
- The program also supports low-level formatting of FLASH cards (SD, MMC, MemoryStick and CompactFlash) using a card-reader.
Frequenty Asked Questions
Q: I only get about 1.0-1.5 MB per second, and my media is supposed to be much faster.
A: This is because you are using a very slow interface (1-1.5 MB per second is actually USB 1.0 limit, so you would want to investigate issues with USB ports). Another reason for slow speeds could be that the storage device has some damage.
Q: The tool was formatting at about 10 MB per second. After I bought a license, however, the speed stays the same — 10 MB per second. Why?
A: The tool has 50 MB per second limit in the free mode. If your media is slower than 50 MB/s, then you will not see any speed increase. The tool cannot go any faster than your storage device allows.
Q: Can I install the software and the license key onto a removable media (USB stick or CD/DVD disk)?
A: Yes, simply use the version that does not need installation, unpack it to your media, and then place your license key in the file llftool.license, located in the same folder as the main executable file.
A: This is because you are using a very slow interface (1-1.5 MB per second is actually USB 1.0 limit, so you would want to investigate issues with USB ports). Another reason for slow speeds could be that the storage device has some damage.
Q: The tool was formatting at about 10 MB per second. After I bought a license, however, the speed stays the same — 10 MB per second. Why?
A: The tool has 50 MB per second limit in the free mode. If your media is slower than 50 MB/s, then you will not see any speed increase. The tool cannot go any faster than your storage device allows.
Q: Can I install the software and the license key onto a removable media (USB stick or CD/DVD disk)?
A: Yes, simply use the version that does not need installation, unpack it to your media, and then place your license key in the file llftool.license, located in the same folder as the main executable file.
Screenshots
Homepage
OS: Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 (x86-x64)
Language: ENG / RUS
Medicine: As of December 17, 2024, HDD Low Level Format tool is free for free for all use, including commercial use, without any limitations whatsoever.
Size: 4,35 MB.
Download From Homepage
Installer | Portable
Login or register to see spoiler's content
Login or register to see spoiler's content
Reasons for raising the release:
Added Portable
No comments