Concise Beam 4.66.10.0
Concise Beam V4 is an easy to use program for the design of precast concrete beams. Concise Beam will perform a load analysis and design checks in accordance with the latest edition of ACI 318, CSA A23.3 & S6, AS3600, or NZ3101.1. Key code parameters can be customized to simulate other design codes. The beam can be conventionally reinforced, partially or fully pretensioned. It can model any cross-sectional shape and will allow the cross-section to vary prismatically (step-wise) over the length of the beam. A graphical editor allows the user to describe any cross-section, including voids.
Concise Beam works in two-dimensions using simple beam theory (ACI B-region) but will also account for torsion along the beam. Concise Beam is NOT able to perform any analysis or design checks required for disturbed regions (ACI D-region) such as at sudden changes in section, large openings, notches, or dapped ends. The user can work in metric or U.S. Customary (Imperial) units, with a variety of individual units (i.e. mm, cm, m), and switch back and forth at will. Libraries of industry standard cross-sections and materials are provided with Concise Beam. The standard libraries can be modified, extended and customized by the user.
Concise Beam works in two-dimensions using simple beam theory (ACI B-region) but will also account for torsion along the beam. Concise Beam is NOT able to perform any analysis or design checks required for disturbed regions (ACI D-region) such as at sudden changes in section, large openings, notches, or dapped ends. The user can work in metric or U.S. Customary (Imperial) units, with a variety of individual units (i.e. mm, cm, m), and switch back and forth at will. Libraries of industry standard cross-sections and materials are provided with Concise Beam. The standard libraries can be modified, extended and customized by the user.
Features
Beam Layouts
Reinforcement Options
Advanced Engineering Capability
- Single simply-supported beam
- Cantilevers at one or both ends
- Analyze any user defined cross-section
- All standardized loads, load cases, and combinations
- Moving Loads, including highway live loads
- Load distribution (including PCI hollowcore distribution)
- Cast-in-place pour (topping or deck) definition with haunch
- Shoring of Cast-in-place pour (point or continuous)
Reinforcement Options
- Reinforced precast concrete beams
- Full or partially-prestressed (pre-tensioned) precast concrete beams
- Deflected, cut, and debonded tendons
- Strand transfer and development options available
Advanced Engineering Capability
- Uses detailed methods whenever appropriate
- Strain-compatibility section analysis accounting for slippage and rupture
- Lateral stability check of tall girders during lifting and transport
- Shear check of hollowcore with filled cores
- Strand and rebar slippage and over-strain check
- Cracked section analysis
- Transfer, lifting, and final stress analysis
- Shored construction options
- Torsion analysis
- Interface shear design check
- Deflection, camber, bearing movement estimates
- Maximum crack width estimate
- PCI Vibration Analysis for Walking and Rhythmic Activity
- Follows recognized methods as used in the PCI Design Handbook, CPCI Metric Design Manual, and the NPCAA Precast Concrete Handbook.
- Concise Beam is NOT able to perform any analysis or design checks required for disturbed regions (ACI D-region) such as at sudden changes in section, large openings, notches, or dapped ends.
Screenshots
Homepage & Changelog
OS: Windows XP / Vista / 7 / 8 / 8.1 / 10 (x86-x64)
Language: ENG
Medicine: Keygen & Patch by RLTS for v4.66.10.0
Size: 5,80 MB.
Download From Homepage
Installer
Download Concise Beam 4.66.10.0
No comments